Magnification Calibration Standards
MCS標準は、ユニーク且つ高費用対効果の倍率校正及び広倍率限界寸法測定方法です。
これらは、卓上SEM、標準SEM、FESEMs及びFIBシステムでの使用に最適です。
| Model Name Figure Discription |
Model Name Figure Discription |
||
|---|---|---|---|
| Model | SMCS-0.1TRP SMCS-0.1TRJ SMCS-0.1TRH SMCS-0.1TRU |
Model | SMCS-0.1CFP SMCS-0.1CFJ SMCS-0.1CFH SMCS-0.1CFU |
 |
 |
||
| MCS-0.1TR traceable calibration standard 2.5mm to 100nm, mounted on standard 12.7mm pin (P), mounted on 12.2mm JEOL stub (J), mounted on 15mm Hitachi stub (H), unmounted (U)
Stub type： Pin (P), JEOL stub (J), Hitachi (H), Unmounted (U) |
MCS-0.1CF certified calibration standard, 2.5mm to 100nm, mounted on standard 12.7mm pin (P), mounted on 12.2mm JEOL stub (J), mounted on 15mm Hitachi stub (H), unmounted (U)
Stub type： Pin (P), JEOL stub (J), Hitachi (H), Unmounted (U) |
||
| Model | SMCS-1TRP SMCS-1TRJ SMCS-1TRH SMCS-1TRU |
Model | SMCS-1CFP SMCS-1CFJ SMCS-1CFH SMCS-1CFU |
 |
 |
||
| MCS-1TR traceable calibration standard, 2.5mm to 1m, mounted on standard 12.7mm pin (P), mounted on 12.2mm JEOL stub (J), mounted on 15mm Hitachi stub (H), unmounted (U)
Stub type： Pin (P), JEOL stub (J), Hitachi (H), Unmounted (U) |
MCS-1CF certified calibration standard, 2.5mm to 1m, mounted on standard 12.7mm pin (P), mounted on 12.2mm JEOL stub (J), mounted on 15mm Hitachi stub (H), unmounted (U)
Stub type： Pin (P), JEOL stub (J), Hitachi (H), Unmounted (U) |
||
*The Certificate of Calibration is specific to the individual specimen you order therefore will have a unique serial number on the certificate.
The Certificate of Traceability is only specific to the batch of specimens, therefore the batch will have been measured and validated and so is traceable to NIST but the individual specimen won’t have been individually checked.
